General Information

The SMRT-100 consists of a factory installed low-voltage 5” high-resolution color touchscreen display, mounted on the front panel of the walk-in beside the door, a power/device wiring base installed in a weatherproof non-metallic box on top of the walk-in, and a single combination sensor for measuring both temperature and %RH inside the walk-in. 

With the connection of a second sensor, the SMRT-100 can continuously monitor and display information for up to two separate rooms simultaneously.

The system may be enhanced by adding an optional SmartRite low-voltage pushbutton light switch installed on the same front panel as the SMRT-100, inside or outside of the walk-in room(s), and an optional SmartRite panic pushbutton installed inside the walk-in to activate an alarm in case of entrapment or other operator emergency. 

The SMRT-100 also has the capability to use an optional interior mounted low-voltage motion sensor to control the lights, and/or an optional magnetic door switch to turn the lights on and/or automatically turn the evaporator coil blower fans off at entry.The SMRT-100 has the capability for multi-way light switching from multiple door locations with the use of the low-voltage SmartRite switches (no 3 or 4-way required) and can modulate door jamb and view-port window heat as a percentage of time-on and time-off to save energy.

The SMRT-100 is set to “English” as the default language. If “Spanish“ is the preferred language, it may be selected from the 

Main Menu->Select Language setting.

To access the settings menu:touch the “Menu” button at the lower left of the display. You will be prompted for a password;enter the default password: 1 2 3 4

If the password is correct, you will have access to the Main Menu Settings.